CEM-MIX: WALL & BRICK MORTAR PLASTER

CEM-MIX: WALL & BRICK MORTAR PLASTER

CEM MIX WALL & BRICK MORTAR PLASTER is a prepacked mix formulated with selected silica sand cement and chemical additives.

CEM MIX WALL & BRICK MORTAR PLASTER provides a high quality consistent mortar or render with superior bonding.

CEM MIX WALL & BRICK MORTAR PLASTER requires only adding water and through mixing at site and can be used in place of conventional or on-site mixing.

Highly recommended for interior or exterior application as a thick bed mortar for laying of :

• Clay, cement brick and masonry unit
• Lightweight concrete block and panels

Benefits:

• Easy to use
• Superior bond & high durability
• Water resistant
• Good workability
• Minimize cracks
• Less wastage & cost saving

How to use?

SURFACE PREPARATION

All concrete must be free of loose particles, dust, dirt, oil, grease and other contaminations. Wet surfaces before laying.

APPLICATION

Recommended thickness for each application is between 6-20mm. For application above 20mm thickness, a 2-coat application method is recommended.

MIXING

Slowly add powder into a pail with water and mix with a slow speed hand-held electric stirrer or drum mixer. Mix for 4-5 minutes until a desired consistent workability is achieved. Mix should be lump free.

Product Certified by: