CEM-COAT: SKIM COAT FINE 388

CEM-COAT: SKIM COAT FINE 388 GREY / WHITE

SKIM COAT FINE is a prepacked mix formulated with selected fine fillers, cement and chemical additives.

SKIM COAT FINE provides a high quality and smooth finishing coat on ceiling and wall or any concrete surfaces.

SKIM COAT FINE requires only adding water and through mixing at site.

Highly recommended for interior application only :

• Concrete and precast surfaces
• Rendered surfaces
• Lightweight concrete walls and panels
• Internal walls

How to use?

SURFACE PREPARATION

All surfaces should be free of loose particles, dust, dirt, oil, grease and other contaminations. Wet surfaces before laying.

APPLICATION

Recommended thickness for each application is between 1-2mm. Allow for sufficient curing time before applying subsequent coat.

MIXING

Slowly add powder into a pail with water and mix with a slow speed hand-held electric stirrer or drum mixer. Mix for 4 minutes until a desired consistent workability is achieved. Mix should be lump free. Do not add water to unused skim coat mix.

Benefits:

• Easy to use
• Superior bond & high durability
• Water resistant
• Good workability
• Minimize cracks

Product Certified by:

Technical Data
Colour	Grey/White
Working Time	50 minutes
Pull-Off Adhesion	0.82 N/mm2
Compressive Strength	5.4 N/mm2
Water Demand	11.2 liters/40kg bag 7 liters/25kg bag"
Packing	25kgs/bag or 40kgs/bag
Coverage (approx.)	32 m2/1 mm thickness/40kg 20 m2/1 mm thickness/25kg